Factory making Drill Pipes - SKM150T Drill rig – LONGTOP MINING
Factory making Drill Pipes - SKM150T Drill rig – LONGTOP MINING Detail:
|
Suitable stone hardness |
f=6-20 |
|
Drilling Dia. |
83～150mm |
|
Drilling depth |
30m |
|
Maximum horizontal hole |
3.2m |
|
Minimum horizontal hole |
0.25m |
|
Speed of travel |
2.5km/h |
|
Gradient |
30° |
|
Swiveling speed |
0～70r/min |
|
Maximum rotary torque |
2600N·m |
|
Maximum lifting force |
16kN |
|
Length of propulsion |
3m |
|
Compensating length |
900mm |
|
Working pressure |
0.7～1.7Mpa |
|
Air consumption |
9～14m³/min |
|
Minimum ground clearance |
295mm |
|
Pitch angle of guide rail |
Down 135°, up 50° |
|
Swing angle of guide rail |
Left 100°, right 45° |
|
Pitch angle of drilling rail |
Down 50°, up 25° |
|
Swing angle of drilling rail |
Left 44°, right 45° |
|
Diesel engine power |
48KW |
|
Dimension （transport condition） |
4400X2200X2050mm |
|
Total weight |
4.2T |
Product detail pictures:
Related Product Guide:
Important Facts About Jack Hammers
Down The Hole (DTH) Rock Drilling – An Introduction
Factory making Drill Pipes - SKM150T Drill rig – LONGTOP MINING, The product will supply to all over the world, such as: , , ,
By from -
By from -
